D-Link DMS-3130 User Manual - Page 88

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Description • 1 - Specifies to use a single delimiter. For example: AABBCC.DDEEFF. • 2 - Specifies to use two delimiters. For example: AABB.CCDD.EEFF • 5 - Specifies to use multiple delimiters. For example: AA.BB.CC.DD.EE.FF Click the Apply button to accept the changes made. DHCPv6 Relay Interface Settings This window is used to display and configure the DHCPv6 relay interface settings. To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Interface Settings, as shown below: Figure 4-57 DHCPv6 Relay Interface Settings Window The fields that can be configured are described below: Parameter Interface VLAN Destination IPv6 Address Output Interface VLAN Description Enter the interface VLAN ID used in the DHCPv6 relay here. The range is from 1 to 4094. Enter the DHCPv6 relay destination address. Enter the output interface VLAN ID for the relay destination here. The range is from 1 to 4094. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. DHCPv6 Relay Format Type Settings This window is used to display and configure the DHCPv6 relay format type settings. This is used to configure DHCPv6 relay Option 37 and Option 18 of the expert UDF string of each port. 77