D-Link DMS-3130 User Manual - Page 232

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Update Time Invalid Time Flush Time Default Metric Version Distance Description Enter the update interval in seconds at which the update message is sent. The range is from 1 to 65535 seconds. Select the Default option to use the default value here which is 30 seconds. Enter the invalid time value in seconds here. The range is from 1 to 65535 seconds. Select the Default option to use the default value here which is 180 seconds. Enter the flush time value in seconds here. The range is from 1 to 65535 seconds. Select the Default option to use the default value here which is 120 seconds. Enter the default metric value here. The range is from 0 to 16. The default metric is used in redistributing routes from other routing protocols. The routes being redistributed are learned by other protocols and may have an incompatible metric to RIP. The specifying of the metric allows the metric to be synced. Select the Default option to use the default metric value, which is 0. Select the global RIP version that will be used as the default version for all interfaces here. Options to choose from are v1 (RIPv1) and v2 (RIPv2). Select the Default option to specify that this feature should use the default configuration. By default, RIPv1 and RIPv2 packets are received, but only RIPv1 packets are sent. Enter the Administrative Distance for RIP here. The range is from 1 to 255. A lower value represents a better route. Select the Default option to use the default Administrative Distance for RIP, which is 100. Click the Apply button to accept the changes made. RIP Distribute List This window is used to display and configure the RIP distribution list settings. To view the following window, click L3 Features > RIP > RIP Distribute List, as shown below: Figure 6-28 RIP Distribute List Window The fields that can be configured are described below: Parameter ACL Name Description Enter the access list name that will be used here. This name can be up to 32 characters long. Note that RIP needs to be enabled to enter an ACL name here. Refer to RIP > RIP Settings. 221