D-Link DMS-3130 User Manual - Page 264
IGMP Static Group Settings
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Query Interval Query Max Response Time Robustness Variable Last Member Query Interval Subscriber Source IP Check Description Enter the interval at which the router sends IGMP general query messages periodically. The range is from 1 to 31744. The default value is 125. You can select default to use default value. Enter the query maximum response time, in seconds, advertised in IGMP queries. The range is from 1 to 25. The default value is 10. You can select default to use default value. Enter the robustness variable used in IGMP. The range is from 1 to 7. The default value is 2. You can select default to use default value. Enter the interval at which the router sends IGMP group-specific or groupsource-specific (channel) query messages. The range is from 1 to 25. The default value is 1. You can select default to use default value. Select to enable or disable the Subscriber Source IP Check feature here. The default state is enabled. You can select default to use default value. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. IGMP Static Group Settings This window is used to display and configure the IGMP static group settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > IGMP > IGMP Static Group Settings, as shown below: Figure 6-71 IGMP Static Group Settings Window The fields that can be configured are described below: Parameter Interface VLAN Group Description Enter the interface VLAN ID used here. This value must be between 1 and 4094. Specifies the IP multicast group address. Valid address range is from 224.0.0.0 to 239.255.255.255. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to locate and display all the entries. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 253