D-Link DMS-3130 User Manual - Page 329

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Filter Map Name Description Enter the CPU ACL filter map name here. This name can be up to 32 characters long. Refer to Access Control List > ACL VLAN Access Map. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Binding button to configure the binding settings for the specified entry. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Binding button, the following page will appear. Figure 8-22 CPU ACL (Binding) Window The fields that can be configured in Match IP Access List are described below: Parameter Sequence No. ACL Name Description Enter the sequence number of the associated match entry here. The range is from 1 to 65535. The lower the number is, the higher the priority of the access list. Enter the standard or extended IP access list name to be matched here. This name can be up to 32 characters long. Alternatively, click the Please Select button to select an existing ACL from the list. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry. The fields that can be configured in Match IPv6 Access List are described below: 318