D-Link DMS-3130 User Manual - Page 253

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide After clicking the Show Detail in the table, the following page will appear. Figure 6-55 OSPFv3 Process Settings (Show Detail) Window Click the OK button to close the window and return to the previous window. OSPFv3 Passive Interface Settings This window is used to display and configure the OSPFv3 passive interface settings. If an interface is passive, the OSPF routing update packets are not sent or received through the specified interface. To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Passive Interface Settings, as shown below: Figure 6-56 OSPFv3 Passive Interface Settings Window The fields that can be configured are described below: Parameter Interface Name Description Enter the passive interface name here. This name can be up to 12 characters long. Refer to L3 Features > Interface. Select the Default option specify all the interfaces as passive interfaces. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 242