D-Link DMS-3130 User Manual - Page 324

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Description • Value - The IP precedence value can also manually be entered here. The range is from 0 to 7. • Mask - Enter the IP precedence mask value here. The range is from 0x0 to 0x7. ToS Select the Type-of-Service (ToS) value that will be used here. Options to choose from are normal (0), min-monetary-cost (1), max-reliability (2), max- throughput (4), and min-delay (8). • Value - The ToS value can also manually be entered here. The range is from 0 to 15. • Mask - Enter the ToS mask value here. The range is from 0x0 to 0xF. DSCP Select the DSCP value that will be used here. Options to choose from are default (0), af11 (10), af12 (12), af13 (14), af21 (18), af22 (20), af23 (22), af31 (26), af32 (28), af33 (30), af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3 (24), cs4 (32), cs5 (40), cs6 (48), cs7 (56), and ef (46). • Value - The DSCP value can also manually be entered here. The range is from 0 to 63. • Mask - Enter the DSCP mask value here. The range is from 0x0 to 0x3F. TCP Flag VID Tick the appropriate TCP flag option to include the flag in this rule. Options to choose from are ack, fin, psh, rst, syn, and urg. This parameter is only available in the protocol type TCP. Enter the VLAN ID that will be associated with this ACL rule here. The range is from 1 to 4094. • Mask - Enter the VLAN ID mask value here. The range is from 0x0 to 0xFFF. Inner VID Enter the inner VLAN ID that will be associated with this ACL rule here. The range is from 1 to 4094. • Mask - Enter the inner VLAN ID mask value here. The range is from 0x0 to 0xFFF. CoS Select the CoS value that will be used here. The range is from 0 to 7. • Mask - Enter the CoS mask value here. The range is from 0x0 to 0x7. Inner CoS After selecting the CoS value, select the inner CoS value that will be used here. The range is from 0 to 7. • Mask - Enter the inner CoS mask value here. The range is from 0x0 to 0x7. Time Range Enter the name of the time range profile that will be used in this ACL rule here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. ACL Interface Access Group This window is used to display and configure the ACL interface access group settings. To view the following window, click ACL > ACL Interface Access Group, as shown below: 313