D-Link DMS-3130 User Manual - Page 439

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter State Shutdown Description Use the drop-down menu to enable or disable the DDM state. Specify whether to shut down the port, when the operating parameter exceeds the Alarm or Warning threshold. • Alarm - Shutdown the port when the configured alarm threshold range is exceeded. • Warning - Shutdown the port when the configured warning threshold range is exceeded. • None - The port will never shut down whether the threshold ranges are exceeded or not. This is the default. Click the Apply button to accept the changes made. DDM Temperature Threshold Settings This window is used to display and configure the DDM Temperature Threshold Settings for specific ports on the Switch. To view the following window, click OAM > DDM > DDM Temperature Threshold Settings, as shown below: Figure 10-28 DDM Temperature Threshold Settings Window The fields that can be configured are described below: Parameter Unit Port Action Type Value Description Select the Switch unit that will be used for this configuration here. Select the port used for the configuration here. Note: Port number specific to fiber optical transceivers will not be available if stacking is enabled (refer to Management > Stacking). Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of temperature threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Enter the threshold value. This value must be between -128 and 127.996 °C. Click the Apply button to accept the changes made. 428