D-Link DMS-3130 User Manual - Page 424

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in CFM LM Settings are described below: Parameter State Description Select to enable or disable the ITU Y.1731 Loss Measurement (LM) feature here. When the administrative state of frame loss measurement function is enabled on an MEP, the MEP will maintain the counters of frame loss measurement function and can reply LMR messages when receiving LMM messages. Click the Apply button to accept the changes made. The fields that can be configured in CFM LM Test are described below: Parameter MAC Address Period PDU Priority Description Enter the MAC address for the LM test here. Select the time period here. This specifies the transmitting interval of the LM PDU. Options to choose from are 100ms, 1sec, and 10sec. Select the PDU priority value here. The range is from 0 to 7 and none. This specifies the 802.1p priority to be set in the LMM messages transmitted by the MEP. The default value is the PDU priority of the MEP. Click the Apply button to accept the changes made. The fields that can be configured in Clear CFM LM are described below: Parameter Type Description Select the type of information to clear here. Options to choose from are: • Result - Specifies to clear the stored LM results. • Statistics - Specifies to clear the stored statistics of ETH-LM frames (LMM and LMR). Click the Clear button to clear the CFM LM statistics information based on the selection made. Click the Clear All button to clear all the CFM LM statistics information. Click the Back button to return to the previous window. CFM Port Settings This window is used to display and configure the CFM port settings. 413