D-Link DMS-3130 User Manual - Page 438

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide DDM This folder contains windows that perform Digital Diagnostic Monitoring (DDM) functions on the Switch. There are windows that allow the user to view the digital diagnostic monitoring status of SFP28/SFP+ modules inserting to the Switch and to configure alarm settings, warning settings, temperature threshold settings, voltage threshold settings, bias current threshold settings, Tx power threshold settings, and Rx power threshold settings. DDM Settings The window is used to view and configure the action that will occur for specific ports when an exceeding alarm threshold or warning threshold event is encountered. To view the following window, click OAM > DDM > DDM Settings, as shown below: Figure 10-27 DDM Settings Window The fields that can be configured in DDM Global Settings are described below: Parameter Transceiver Monitoring Traps Alarm Transceiver Monitoring Traps Warning Description Select to enable or disable the transceiver monitoring traps alarm feature here. Select to enable or disable the transceiver monitoring traps warning feature here. Click the Apply button to accept the changes made. The fields that can be configured in DDM Shutdown Settings are described below: Parameter Unit From Port - To Port Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Note: Port number specific to fiber optical transceivers will not be available if stacking is enabled (refer to Management > Stacking). 427