D-Link DMS-3130 User Manual - Page 252

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide After clicking the Edit button, the following page will appear. Figure 6-54 OSPFv3 Process Settings (Edit) Window The fields that can be configured are described below: Parameter OSPF State Router ID Default Metric Type Description Select to enable or disable the OSPFv3 state. Enter the router ID for the OSPF process here. Enter the default metric value for the OSPF process here. The range is from 1 to 16777214. By default, this value is 20. This value is used in conjunction with the OSPFv3 redistribution feature to enable the current routing protocol to use the same metric value for all redistributed routes. A default metric helps solve the problem of redistributing routes with incompatible metrics. Whenever the metrics don't convert directly, using a default metric provides a reasonable substitute and enables the redistribution to proceed. Select the distance type here. Options to choose from are Intra-Area, InterArea, External-1 and External-2. • Intra-Area - Specifies the distance for OSPF intra-area routes. • Inter-Area - Specifies the distance for OSPF inter-area routes. • External-1 - Specifies the distance for OSPF external type-1 routes. • External-2 - Specifies the distance for OSPF external type-2 routes. Distance Auto Bandwidth Enter the distance value for the OSPF process here. The range is from 1 to 254. By default, this value is 110 for all OSPF routes. Enter the auto-bandwidth value here. This feature is used to control the reference value IPv6 OSPF uses when calculating metrics for interfaces. The range is from 1 to 4294967. Click the Apply button to accept the changes made. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 241