D-Link DMS-3130 User Manual - Page 229

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Summary Description Select this option to display a summary and count of the route sources configured on this Switch. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Route Preference This window is used to display and configure the route preference settings. Use this window to configure the distance, which represents the route's trust rating. The route with a lower distance value is preferred over the route with a higher distance value. A route with the distance 255 will not be installed for routing of packets since it indicates that the route is not trusted. To view the following window, click L3 Features > Route Preference, as shown below: Figure 6-25 Route Preference Window The fields that can be configured are described below: Parameter Distance Default Distance Static Description Enter the administrative distance of default routes here. The range is from 1 to 255. By default, this value is 1. Enter the administrative distance of static default routes here. The range is from 1 to 255. By default, this value is 60. Click the Apply button to accept the changes made. ECMP Settings This window is used to display and configure the Equal-Cost Multi-Path (ECMP) routing settings. This is used to configure the load balancing hash algorithm and used to determine the next hop entry for multiple paths destined for the same destination. To view the following window, click L3 Features > ECMP Settings, as shown below: Figure 6-26 ECMP Settings Window 218