D-Link DMS-3130 User Manual - Page 142
Voice VLAN Port
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Voice VLAN State Voice VLAN ID Voice VLAN CoS Aging Time Description Select to globally enable or disable the voice VLAN feature here. Enter the VLAN ID of the voice VLAN here. The VLAN to be specified as the voice VLAN needs to pre-exist before configuration. The range is from 2 to 4094. Select the CoS of the voice VLAN here. The range is from 0 to 7. The voice packets arriving at the voice VLAN enabled port are marked as the CoS specified here. The remarking of CoS packets allow the voice VLAN traffic to be distinguished from data traffic in Quality of Service. Enter the aging time value here. This is used to configure the aging time for aging out the automatically learned voice device and voice VLAN information. When the last voice device connected to the port stops sending traffic and the MAC address of this voice device is aged out from FDB, the voice VLAN aging timer will be started. The port will be removed from the voice VLAN after the expiration of the voice VLAN aging timer. If voice traffic resumes during the aging time, the aging timer will be cancelled. The range is from 1 to 65535 minutes. Click the Apply button to accept the changes made. Voice VLAN Port This window is used to display and configure the voice VLAN interface settings. To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Port, as shown below: Figure 5-32 Voice VLAN Port Window The fields that can be configured are described below: Parameter Unit From Port - To Port State Description Select the Switch unit that will be used for this configuration here. This option is only available when stacking is enabled. Select the range of ports that will be used for this configuration here. Select to enable or disable the voice VLAN feature on the specified port(s) here. When the voice VLAN is enabled for a port, the received voice packets will be forwarded in the voice VLAN. The received packets are determined as voice packets if the source MAC addresses of packets complies with the OUI addresses. 131