D-Link DMS-3130 User Manual - Page 275

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter IP Next Hop IP Precedence IPv6 Default Next Hop IPv6 Next Hop Description specified is tried in turn to route the packet. Up to 8 default next-hop IP addresses can be entered. Select the IP next hop type here. This feature is used to configure the next-hop router to route the packet that passes the match clauses of the configured route map sequence. Options to choose from are IP Address and Recursive. • IP Address - Specifies the IP addresses of the next-hops to route the packet. Enter the next-hop IP addresses in the spaces provided here. Up to 8 next-hop IP addresses can be entered. • Recursive - Specifies the IP address of the recursive as the next-hop router. Enter the recursive next-hop IP address in the space provided here. Select the IP precedence option here. Options to choose from are Routine, Priority, Immediate, Flash, Flash Override, Critical, Internet, and Network. Use this feature to set the precedence value in the IP header. This option only takes effect when policy routing involves the IPv4 packet. Enter the default next-hop IPv6 address in the space provided that will be used to route the packet. Select the IPv6 next hop type here. This feature is used to configure the nexthop router to route the packet that passes the match clauses of the configured route map sequence. Options to choose from are: • IP Address - Specifies the IPv6 addresses of the next-hops to route the packet. Enter the next-hop IPv6 addresses in the space provided here. IPv6 Precedence Metric Metric Type • Recursive - Specifies the IPv6 address of the recursive as the next-hop router. Enter the recursive next-hop IPv6 address in the space provided here. Select the IPv6 precedence option here. Options to choose from are Routine, Priority, Immediate, Flash, Flash Override, Critical, Internet, and Network. Use this feature to set the precedence value in the IPv6 header. This option only takes effect when policy routing involves the IPv6 packet. Select and enter the metric value here that will be used in the modification. The range is from 0 to 4294967294. Select the metric type here that will be used in the modification. Options to choose from are Type-1 and Type-2. • Type-1 - Specifies to use the OSPF external type-1 metric. • Type-2 - Specifies to use the OSPF external type-2 metric. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. Policy Route This window is used to display and configure the policy route settings. To view the following window, click L3 Features > Policy Route, as shown below: 264