D-Link DMS-3130 User Manual - Page 130

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking Clone Description Select one of the following VLAN mode: Hybrid, Access, Trunk, 802.1QTunnel, Promiscuous, or Host. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select whether the frames should be checked for its acceptance when entering the port. Select this option to clone the configured information to the selected ports. Specify the From Port and To Port for the port range. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. When Host was selected as the VLAN Mode, the following page will appear. Figure 5-17 VLAN Interface (Host) Window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking Clone Description Select one of the following VLAN mode: Hybrid, Access, Trunk, 802.1QTunnel, Promiscuous, or Host. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select whether the frames should be checked for its acceptance when entering the port. Select this option to clone the configured information to the selected ports. Specify the From Port and To Port for the port range. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. After saving your changes, you may click the Port Summary tab to view your current VLAN configurations listed by ports. 802.1v Protocol VLAN Protocol VLAN Profile This window is used to display and configure 802.1v protocol VLAN profiles. The 802.1v Protocol VLAN group settings support multiple VLANs for each protocol and allow the user to configure untagged ports of different protocols on the 119