D-Link DMS-3130 User Manual - Page 400

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide CPU Protect Type This window is used to display and configure the CPU protection type settings. To view the following window, click Security > Safeguard Engine > CPU Protect Type, as shown below: Figure 9-84 CPU Protect Type Window The fields that can be configured in CPU Protect Type are described below: Parameter Protocol Name Rate Limit Description Select the protocol name option here. The options are 8021X, ARP, DHCP, DNS, GVRP, ICMPv4, ICMPv6-NDP, ICMPv6-OTHER, IGMP, LACP, NTP, OSPF, PIM, PPPoE, RIP, STP, VRRP, SNMP, SSH, Telnet, TFTP, and WEB. Enter the rate limit value used here. This value must be between 0 and 1024 packets per second. Tick the No Limit option to disable the rate limit. Click the Apply button to accept the changes made. The fields that can be configured in Protect Type Information are described below: Parameter Protocol Name Description Select the protocol name option here. The options are 8021X, ARP, DHCP, DNS, GVRP, ICMPv4, ICMPv6-NDP, ICMPv6-OTHER, IGMP, LACP, NTP, OSPF, PIM, PPPoE, RIP, STP, VRRP, SNMP, SSH, Telnet, TFTP, WEB, and All. Click the Find button to locate a specific entry based on the information entered. Trusted Host This window is used to display and configure the trusted host settings. To view the following window, click Security > Trusted Host, as shown below: 389