D-Link DMS-3130 User Manual - Page 76

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Pool Name Description Enter the DHCPv6 server pool name here. This name can be up to 12 characters long. Click the Apply button to accept the changes made. Click the Configure button to configure the DHCPv6 server pool settings. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Configure button, the following page will appear. Figure 4-40 DHCPv6 Server Pool Settings (Configure) Window The fields that can be configured in DHCPv6 Server Pool Configure are described below: Parameter Address Prefix Valid Lifetime Preferred Lifetime DNS Server Domain Name Description Select and enter the DHCPv6 server pool IPv6 network address and prefix length here. For example, 2015::0/64. Enter the valid lifetime value here. The range is from 60 to 4294967295 seconds. The valid lifetime should be greater than preferred lifetime. If this value is not specified, then the default valid lifetime will be 2592000 seconds (30 days). Enter the preferred lifetime value here. The range is from 60 to 4294967295 seconds. If this value is not specified, then the default preferred lifetime will be 604800 seconds (7 days). Enter the DNS server IPv6 address to be assigned to requesting DHCPv6 clients here. Enter the domain name to be assigned to requesting DHCPv6 clients here. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. 65