D-Link DXS-3610 User Manual - Page 104

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter VRF Name Host Name IP Address IPv6 Address Description Enter the name of the VRF instance here. This can be up to 12 characters long. Enter the host name of the equipment. Select and enter the IPv4 address of the equipment. Select and enter the IPv6 address of the equipment. Click the Apply button to accept the changes made. Click the Clear All button to clear the information entered in all the fields on this page. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IP Source Interface This window is used to display and configure the IP source interface settings. To view the following window, click Management > IP Source Interface, as shown below: Figure 4-73 IP Source Interface Window The fields that can be configured in IP TFTP Source Interface are described below: Parameter Source Interface State Interface Type Interface ID Description Select to enable or disable the IP TFTP source interface state here. After enabling the Source Interface State option, select the interface type here. Options to choose from are Loopback, Mgmt, and VLAN. Enter the interface ID here. For loopback interfaces, this value is from 1 to 8. For the management interface (Mgmt), this value can only be 0. For VLAN interfaces, this value is from 1 to 4094. Click the Apply button to accept the changes made. The fields that can be configured in IP FTP Source Interface are described below: Parameter Source Interface State Description Select to enable or disable the IP FTP source interface state here. 93