D-Link DXS-3610 User Manual - Page 125

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured in SMTP Global Settings are described below: Parameter SMTP IP SMTP IPv4 Server Address SMTP IPv6 Server Address SMTP IPv4 Server Port SMTP IPv6 Server Port VRF Name Self Mail Address Send Interval Description Select the SMTP server IP address type here. Options to choose from are IPv4 and IPv6. After selecting IPv4 as the SMTP IP type, enter the SMTP server IPv4 address here. After selecting IPv6 as the SMTP IP type, enter the SMTP server IPv6 address here. After selecting IPv4 as the SMTP IP type, enter the SMTP server port number here. The range is from 1 to 65535. By default, this value is 25. After selecting IPv6 as the SMTP IP type, enter the SMTP server port number here. The range is from 1 to 65535. By default, this value is 25. Enter the name of the VRF instance here. This can be up to 12 characters long. Enter the email address that represents the Switch here. This string can be up to 254 characters long. Enter the sending interval value here. The range is from 0 to 65535 minutes. By default, this value is 30 minutes. Click the Apply button to accept the changes made. The fields that can be configured in SMTP Mail Receiver Address are described below: Parameter Add a Mail Receiver Description Enter the email address of the receiver here. This string can be up to 254 characters long. Click the Add button to add a new SMTP email recipient. The fields that can be configured in Send a Test Mail to All are described below: Parameter Subject Content Description Enter the subject of the email here. This string can be up to 128 characters long. Enter the content of the email here. This string can be up to 512 characters long. Click the Apply button to accept the changes made. Click the Delete All button to delete all the entries found in the display table. Click the Delete button to delete the specified entry. Reboot Schedule Settings This window is used to display and configure the reboot schedule settings. Use this window to configure the reboot schedule of the Switch. The reboot schedule must take effect within 30 days. After the reboot schedule has taken effect and the Switch is restarted, it will generate a log message to identify that the Switch has been restarted using the reboot schedule. After a reboot or a shutdown, the reboot schedule will be deleted automatically. If the Switch was manually rebooted or powered off, before the reboot schedule could take effect, the specified reboot schedule will be cancelled. 114