D-Link DXS-3610 User Manual - Page 240

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide After clicking the Show Detail button, the following page will be available. Figure 6-12 IPv6 Interface (Detail, IPv6 Interface Settings) Window The fields that can be configured are described below: Parameter IP VRF Forwarding IPv6 MTU IPv6 State Description Enter the name of the VRF instance that will be forwarded here. Click the Select VRF button to display and select a VRF instance from the list. Enter the IPv6 MTU value here. This is used to configure the MTU to be advertised in RA messages. The range is from 1280 to 65534 bytes. By default, this value is 1500 bytes. Select to enable or disable the IPv6 interface global state here. Click the Back button to discard the changes made and return to the previous page. Click the Apply button to accept the changes made. The fields that can be configured for IPv6 Address Autoconfig are described below: Parameter State Description Select to enable or disable the automatic configuration of the IPv6 address using stateless auto-configuration here. Select the Default option to specify that if the default router is selected on this interface, a default route will be installed using that default router. This option can only be specified on one interface. Click the Apply button to accept the changes made. The fields that can be configured for Static IPv6 Address Settings are described below: Parameter IPv6 Address Description Enter the IPv6 address for this IPv6 interface here. Select the EUI-64 option to configure an IPv6 address on the interface using the EUI-64 interface ID. 229