D-Link DXS-3610 User Manual - Page 663

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit Source File Description Select the Switch unit that will be used for this configuration here. Enter the source filename and path of the configuration file located on the Switch here. This field can be up to 64 characters long. Select the running-config option to back up the running configuration file from the Switch. Select the startupconfig option to back up the start-up configuration file from the Switch. Click the Backup button to initiate the configuration file backup. Configuration Backup to TFTP This window is used to initiate a configuration file backup to a TFTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to TFTP, as shown below: Figure 16-15 Configuration Backup to TFTP Window The fields that can be configured are described below: Parameter Unit TFTP Server IP VRF Name Source File Destination File Description Select the Switch unit that will be used for this configuration here. Enter the TFTP server IP address here. When select the IPv4 option, enter the IPv4 address of the TFTP server in the space provided. When the IPv6 option is selected, enter the IPv6 address of the TFTP server in the space provided. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the configuration file located on the Switch here. This field can be up to 64 characters long. Select the running-config option to back up the running configuration file from the Switch. Select the startupconfig option to back up the start-up configuration file from the Switch. Enter the destination path and location where the configuration file should be stored on the TFTP server. This field can be up to 64 characters long. Click the Backup button to initiate the configuration file backup. 652