D-Link DXS-3610 User Manual - Page 373

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide BGP Reflector Settings This window is used to display and configure the BGP reflector settings. To view the following window, click L3 Features > BGP > BGP Reflector Settings, as shown below: Figure 6-176 BGP Reflector Settings Window The fields that can be configured in BGP Reflector Settings are described below: Parameter Route Reflector Cluster ID Client to Client Reflection Description Enter the route reflector cluster ID here. Select to enable or disable the client-to-client reflection feature here. Click the Apply button to accept the changes made. The fields that can be configured in BGP Reflector Client are described below: Parameter Address Family Neighbor State Description Select the address family that will be used here. Options to choose from are:  IPv4 Unicast - Specifies to use the IPv4 unicast address family in this configuration.  IPv4 Multicast - Specifies to use the IPv4 multicast address family in this configuration.  L2VPN VPLS - Specifies to use the Layer 2 VPN VPLS address family.  VPNv4 - Specifies to use the VPNv4 address family.  IPv6 Unicast - Specifies to use the IPv6 unicast address family in this configuration. This is used to assign the specified neighbor as its client. Options to choose from are:  IPv4 Address - Select and enter the IPv4 address of the neighboring router here.  Peer Group - Select and enter the peer group name that will act as the route reflector client here.  IPv6 Address - Select and enter the IPv6 address of the neighboring router here. Select to enable or disable the BGP reflector client state here. Click the Apply button to accept the changes made. 362