D-Link DXS-3610 User Manual - Page 91

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter State Description Select this option to enable or disable the DHCP local relay on the specific VLAN(s). Click the Apply button to accept the changes made. NOTE: When the state of the DHCP relay port is disabled, the port will not relay or locally relay received DHCP packets. DHCPv6 Relay DHCPv6 Relay Global Settings This window is used to display and configure the DHCPv6 Relay remote ID settings. To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Global Settings, as shown below: Figure 4-61 DHCPv6 Relay Global Settings Window The fields that can be configured in DHCPv6 Relay Remote ID Settings are described below: Parameter IPv6 DHCP Relay Remote ID Format Standalone Unit Format IPv6 DHCP Relay Remote ID UDF Description Select the IPv6 DHCP Relay remote ID format that will be used here. Options to choose from are Default, CID with User Define, User Define, and Expert UDF. After selecting the Expert UDF option, select the standalone unit format here. Options to choose from are 0 and 1. Select to choose the User Define Field (UDF) for the remote ID. Options to choose from are:  None - Specifies to keep the UDF empty for the remote ID.  ASCII - Select to enter the ASCII string with a maximum of 128 characters in the text box.  HEX - Select to enter the hexadecimal string with a maximum of 256 characters in the text box. 80