D-Link DXS-3610 User Manual - Page 145

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. MVRP Port Settings This window is used to display and configure the MVRP port settings. To view the following window, click L2 Features > VLAN > MVRP > MVRP Port Settings, as shown below: Figure 5-27 MVRP Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port MVRP Status Join Time Leave Time Leave All Time MVRP Registration Restricted Registration Description Select the unit ID of the Switch in the physical stack here. Select the switch port or the range of switch ports here. Select to enable or disable the MVRP function of the specified port(s) here. Enter the join time here. The range is from 100 to 10000000 centiseconds. Enter the leave time here. The range is from 300 to 10000000 centiseconds. Enter the leave all time here. The range is from 1000 to 10000000 centiseconds. Select the MVRP registration method here. Options to choose from are:  Normal - Specifies that all MVRP requests and messages are received and processed.  Fixed - Specifies that additional MVRP requests and messages are ignored. All existing registrations on the port are retained.  Forbidden - Specifies that all the VLANs, except for VLAN 1, are deregistered on the port. Select to enable or disable restricted registration here. When enabled, the creation of a new dynamic VLAN entry is permitted only if there is a static VLAN entry for the VLAN, in which the Registrar Administrative Control value for this port is Normal Registration. Click the Apply button to accept the changes made. 134