D-Link DXS-3610 User Manual - Page 25

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured for Interface Breakout are described below: Parameter Unit From Port - To Port Breakout Mode Description Select the stacking unit ID of the Switch that will be configured here. Select the appropriate port range used for the configuration here. Select the breakout mode here. Options to choose from are:  25g-4x - Specifies to split the 100 Gbps port into four 25 Gbps ports.  100g-1x - Specifies to revert back a single 100 Gbps port.  10g-4x - Specifies to split the 100 Gbps port into four 10 Gbps ports. Click the Apply button to accept the changes made. This configuration only takes effect after the switch was rebooted. Interface Description This window is used to display the status, administrative status, and description of each port on the Switch. To view the following window, click System > Interface Description, as shown below: Figure 3-11 Interface Description Window Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Loopback Test This window is used to display and configure the loopback settings of the physical port interfaces and to perform loopback tests. 14