D-Link DXS-3610 User Manual - Page 327

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter VRF Name RP Hash Description Click the Please Select button to display and select a VRF instance from the list. Enter the IPv4 multicast group address here. Click the Find button to display a list of access lists based on the selection made. PIM Register Settings This window is used to display and configure the PIM register settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM Register Settings, as shown below: Figure 6-116 PIM Register Settings Window The fields that can be configured in Register Checksum Wholepkt are described below: Parameter VRF Name RP Address Access List Name Description Click the Please Select button to display and select a VRF instance from the list. Enter the standard access list that will be used here. Alternatively, click the Show List button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Click the Find button to find and display specified entries. Click the Add button to add a new entry based on the information entered. Click the Delete button to delete an entry based on the information entered. The fields that can be configured in Register Probe Time are described below: Parameter VRF Name Description Click the Please Select button to display and select a VRF instance from the list. 316