D-Link DXS-3610 User Manual - Page 451

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide PFC Port Settings This window is used to display and configure the Priority-based Flow Control (PFC) port settings. To view the following window, click QoS > QoS PFC > PFC Port Settings, as shown below: Figure 7-25 PFC Port Settings Window The fields that can be configured in PFC Port Settings are described below: Parameter Unit From Port - To Port Willing Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Select to enable or disable the willing feature here. This is used to turn on the Data Center Bridging Exchange Protocol (DCBX) PFC willing feature which indicates that the specified local port(s) is/are willing to accept PFC configurations from a remote system. Click the Apply button to accept the changes made. The fields that can be configured in Clear PFC Counters are described below: Parameter Unit From Port - To Port Frame Type Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Select the All option to specify that all ports will be used here. Select the frame type that will be cleared here. Options to choose from are:  RX - Specifies to clear the counters of received PFC frames.  TX - Specifies to clear the counters of transmitted PFC frames.  Both - Specifies to clear the counters of received and transmitted PFC frames. Click the Clear button to clear the counters based on the selections made. 440