D-Link DXS-3610 User Manual - Page 665

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Configuration Backup to RCP This window is used to initiate a configuration file backup to an RCP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to RCP, as shown below: Figure 16-17 Configuration Backup to RCP Window The fields that can be configured are described below: Parameter Unit RCP Server IP User Name VRF Name Source File Destination File Description Select the Switch unit that will be used for this configuration here. Enter the RCP server IP address here. Enter the user name used for the RCP connection here. This name can be up to 16 characters long. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the configuration file located on the Switch here. This field can be up to 64 characters long. Select the running-config option to back up the running configuration file from the Switch. Select the startupconfig option to back up the start-up configuration file from the Switch. Enter the destination path and location where the configuration file should be stored on the RCP server. This field can be up to 64 characters long. Click the Backup button to initiate the configuration file backup. Certificate & Key Restore & Backup Certificate & Key Restore from HTTP This window is used to initiate a certificate and key restore from a local PC using HTTP. To view the following window, click Tools > Certificate & Key Restore & Backup > Certificate & Key Restore from HTTP, as shown below: Figure 16-18 Certificate & Key Restore from HTTP Window 654