D-Link DXS-3610 User Manual - Page 94
DHCPv6 Relay Remote ID Profile Settings
View all D-Link DXS-3610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide DHCPv6 Relay Remote ID Profile Settings This window is used to display and configure the DHCPv6 relay remote ID profile settings. This is used to create a new profile for DHCPv6 relay Option 82. To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Remote ID Profile Settings, as shown below: Figure 4-63 DHCPv6 Relay Remote ID Profile Settings Window The fields that can be configured are described below: Parameter Profile Name Format String Description Enter the profile name here. This string can be up to 32 characters long. After clicking the Edit button, enter the Expert UDF format type string for DHCPv6 Option 37 here. This string can be up to 251 characters long. The following rules need to be considered: This string can be a hexadecimal value, an ASCII string, or any combination of hexadecimal values and ASCII characters. An ASCII string needs to be enclosed with quotation marks ("") like "Ethernet". Any ASCII characters outside of the quotation marks will be interpreted as hexadecimal values. A formatted key string is a string that should be translated before being encapsulated in the packet. A formatted key string can be contained both ASCII strings and hexadecimal values. For example, "%" +"$"+"1~32"+ "keyword"+":": o % - Indicates that the string that follows this character is a formatted key string. o "$" or "0" - (Optional) Indicates a fill indicator. This option specifies how to fill the formatted key string to meet the length option. This option can be either "$" or "0", and cannot be specified as both at the same time. "$" - Indicates to fill the leading space (0x20). "0" - Indicates to fill the leading 0. By default, this option is used. o 1~32 - (Optional) Indicates a length option. This specifies how many characters or bytes the translated key string should occupy. If the actual length of the translated key string is less than the length specified by this option, a fill indicator will be used to fill it. Otherwise, this length option and fill indicator will be ignored and the actual string will be used directly. o keyword - Indicates that the keyword will be translated based on the actual value of the system. The following keyword definitions specifies that a command will be refused if an unknown or unsupported keyword is detected: devtype - The model name of the device. Only an ASCII string is allowed. sysname - Indicates the System name of the Switch. Only an ASCII string is allowed. 83