D-Link DXS-3610 User Manual - Page 18

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Port Configuration Port Settings This window is used to display and configure the Switch's port settings. To view the following window, click System > Port Configuration > Port Settings, as shown below: Figure 3-4 Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port State MDIX Flow Control Unidirectional Mode Duplex Description Select the stacking unit ID of the Switch that will be configured here. Select the appropriate port range used for the configuration here. Select to enable or disable the physical port state here. Select the Medium Dependent Interface Crossover (MDIX) option here. Options to choose from are:  Auto - Select this option for auto-sensing of the optimal type of cabling.  Normal - Select this option for normal cabling. If this option is selected, the port is in the MDIX mode and can be connected to a PC NIC using a straight-through cable or a port (in the MDI mode) on another Switch through a crossover cable.  Cross - Select this option for crossover cabling. If this option is selected, the port is in the MDI mode and can be connected to a port (in the MDIX mode) on another Switch through a straight cable. Select to turn flow control On or Off here. This feature will not work through Switches that are physically stacked. Select the unidirectional mode here. Options to choose from are:  None - Specifies bidirectional communication through the port.  Send Only - Specifies only outgoing unidirectional communication through the port.  Receive Only - Specifies only incoming unidirectional communication through the port. Select the duplex mode used here. Options to choose from are Auto and Full. 7