D-Link DXS-3610 User Manual - Page 351

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Peer Address RP List Description Enter the MSDP peer address here. Enter the name of the standard IP access list that defines the RP prefix list here. This string can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Find button to find and display an entry based on the information entered. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MSDP Mesh Group Settings This window is used to display and configure the MSDP mesh group settings. Before adding an MSDP peer to the mesh group, an MSDP peer must be added first. If an MSDP peer has been added to multiple mesh groups, only the last configuration takes effect. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > MSDP > MSDP Mesh Group Settings, as shown below: Figure 6-148 MSDP Mesh Group Settings Window The fields that can be configured are described below: Parameter Peer Address Mesh Name Description Enter the MSDP peer IP address here. Enter the name of the mesh group here. This string can be up to 64 characters long. Click the Apply button to accept the changes made. Click the Find button to find and display an entry based on the information entered. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 340