D-Link DXS-3610 User Manual - Page 291

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Stub Area Range IPv6 Prefix Advertise Default Cost No Summary Description the ABR. Routing information is condensed at area boundaries. External to the area, a single route is advertised for each address range. Select this option to define an area as a Stub area. After selecting the Range option, enter the OSPF area range IPv6 prefix and prefix length here. After selecting the Range option, select the advertise option here. Options to choose from are:  Advertise - Specifies to advertise and generate an inter-area prefix LSA for the specified address range.  No Advertise - Specifies to set the status to Do-Not-Advertise for the specified address range. The inter-area prefix LSA is suppressed, and the component networks remain hidden from other networks. After selecting the Stub option, enter the default cost value here. The range is from 0 to 65535. Select the Default option to use the default cost value for this area, which is 1. After selecting the Stub option, select this option to prevent an ABR from sending inter-area prefix LSAs into the stub area. Click the Apply button to accept the changes made. The fields that can be configured in OSPFv3 Area Table are described below: Parameter Process ID Description Enter the process ID of the OSPF area used here. The range is from 1 to 65535. Click the Find button to locate a specific entry based on the information entered. Click the Process ID link (1) to access and configure the specified OSPFv3 area. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking a Stub area the Process ID link (1) in the table, the following page will appear. Figure 6-74 OSPFv3 Area Settings (Process ID, Stub) Window Click the OK button to close the window and return to the previous window. 280