D-Link DXS-3610 User Manual - Page 129

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Multicast Static FDB This window is used to display and configure the multicast static FDB settings. To view the following window, click L2 Features > FDB > Static FDB > Multicast Static FDB, as shown below: Figure 5-2 Multicast Static FDB Window The fields that can be configured are described below: Parameter Unit From Port - To Port VID MAC Address Description Select the stacking unit ID of the Switch that will be configured here. Select the range of ports that will be used for this configuration here. Enter the VLAN ID of the VLAN the corresponding MAC address belongs to. Enter the static destination MAC address of the multicast packets. This must be a multicast MAC address. Click the Apply button to accept the changes made. Click the Delete All button to remove all the entries. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MAC Address Table Settings This window is used to display and configure the global MAC address table settings. To view the following window, click L2 Features > FDB > MAC Address Table Settings, as shown below: Figure 5-3 MAC Address Table Settings (Global Settings) Window The fields that can be configured are described below: Parameter Aging Time Aging Destination Hit Description Enter the MAC address table aging time here. The range is from 10 to 1000000 seconds. Entering 0 will disable MAC address aging. By default, this value is 300 seconds. Select to enable or disable the aging destination hit function. 118