D-Link DXS-3610 User Manual - Page 656

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Firmware Upgrade from RCP This window is used to initiate a firmware upgrade from an RCP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from RCP, as shown below: Figure 16-5 Firmware Upgrade from RCP Window The fields that can be configured are described below: Parameter Unit RCP Server IP User Name VRF Name Source File Destination File Description Select the Switch unit that will be used for this configuration here. Enter the RCP server IP address here. Enter the user name used for the RCP connection here. This name can be up to 16 characters long. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the firmware file located on the RCP server here. This field can be up to 64 characters long. Enter the destination path and location where the new firmware should be stored on the Switch. This field can be up to 64 characters long. Click the Upgrade button to initiate the firmware upgrade. Firmware Backup to HTTP This window is used to initiate a firmware backup to a local PC using HTTP. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to HTTP, as shown below: Figure 16-6 Firmware Backup to HTTP Window The fields that can be configured are described below: Parameter Unit Source File Description Select the Switch unit that will be used for this configuration here. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. 645