D-Link DXS-3610 User Manual - Page 432

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit From Port - To Port Direction Rate Limit Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Only the Output option is available. This specifies that the rate limit for egress packets is configured. Select and enter the rate limit value here. The specified limitation cannot exceed the maximum speed of the specified interface. For the ingress bandwidth limitation, the ingress will send a pause frame or a flow control frame when the received traffic exceeds the limitation. Options to choose from are:  Bandwidth - Select and enter the rate limit bandwidth value here. The range is from 8 to 100000000 Kbps. o Burst Size - Enter the burst size here. The range is from 0 to 128000 Kilobytes. When this value is 0, the rate limit function is disabled (no limit) on the interface.  Percent - Select and enter the rate limit bandwidth percentage here. The range is from 1 to 100 percent (%). o Burst Size - Enter the burst size here. The range is from 0 to 128000 Kilobytes.  None - Select this option to remove the rate limit on the specified port(s). By default, this option is used for Input and Output through all the ports. Click the Apply button to accept the changes made. Queue Rate Limiting This window is used to display and configure the queue rate limiting settings. To view the following window, click QoS > Basic Settings > Queue Rate Limiting, as shown below: Figure 7-6 Queue Rate Limiting Window 421