D-Link DXS-3610 User Manual - Page 662

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Configuration Restore from RCP This window is used to initiate a configuration restore from an RCP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from RCP, as shown below: Figure 16-13 Configuration Restore from RCP Window The fields that can be configured are described below: Parameter Unit RCP Server IP User Name VRF Name Source File Destination File Replace Description Select the Switch unit that will be used for this configuration here. Enter the RCP server IP address here. Enter the user name used for the RCP connection here. This name can be up to 16 characters long. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the configuration file located on the RCP server here. This field can be up to 64 characters long. Enter the destination path and location where the configuration file should be stored on the Switch. This field can be up to 64 characters long. Select the running-config option to restore and overwrite the running configuration file on the Switch. Select the startup-config option to restore and overwrite the start-up configuration file on the Switch. Select this option to replace the configuration file on the Switch with this one. Click the Restore button to initiate the configuration restore. Configuration Backup to HTTP This window is used to initiate a configuration file backup to a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as shown below: Figure 16-14 Configuration Backup to HTTP Window 651