D-Link DXS-3610 User Manual - Page 684
ARP, Auto Image, Auto Save Config
View all D-Link DXS-3610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 684 highlights
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Log Description Log Message: Packet match Expert ACL access-list number: sequence number: action: , host: mac: , :, packet cnt: Parameters Description: list-id: The access list number. seq-num: The rule sequence number. action: The action (permit or deny). ipaddr: The source IP address. macaddr: The source MAC address. packet-flow: the packet flow (ingress or egress). interface-id: The port number. pkt-cnt: The number of packets that match the rule. Severity ARP Log Description 1 Event Description: Gratuitous ARP detected duplicate IP. Log Message: Conflict IP was detected with this device (IP: , MAC: , Port , Interface: ) Parameters Description: ipaddr: The IP address which is duplicated with our device. macaddr: The MAC address of the device that has duplicated IP address as our device. unitID: Integer value. Represent the ID of the device in the stacking system. portNum: Integer value. Represent the logic port number of the device. ipif-name: The name of the interface of the switch which has the conflict IP address. Severity Warning Auto Image Log Description 1 Event Description: This message means that Auto Image Firmware upgraded successfully. Log Message: The downloaded firmware was successfully executed by DHCP Auto Image update (TFTP Server IP: ) Parameters Description: ipaddr: TFTP Server IP address. 2 Event Description: This message means that Auto Image Firmware upgraded unsuccessfully. Log Message: The downloaded firmware was not successfully executed by DHCP Auto Image update (TFTP Server IP: ) Parameters Description: ipaddr: TFTP Server IP address. Severity Informational Informational Auto Save Config Log Description 1 Event Description: Record the event when the configure information of DDP is saved automatically. Log Message:CONFIG-6-DDPSAVECONFIG: [Unit ,]Configuration automatically saved to flash due to configuring from DDP(Username: , IP: ) Parameters Description: Unit: Box ID username: Represent current login user. ipaddr: Represent client IP address Severity Informational 673