D-Link DXS-3610 User Manual - Page 605
MPLS LSP Trigger Information, MPLS Forwarding Settings, Action, Permit, IP Address, Apply, Clear All
View all D-Link DXS-3610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 605 highlights
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide MPLS LSP Trigger Information This window is used to display and configure the MPLS Label-Switched Path (LSP) trigger information. The LSP trigger filter rules are IP access list rules that it is used to control the IP routes that can be used to trigger the establishment of an LSP. To view the following window, click MPLS > MPLS LSP Trigger Information, as shown below: Figure 11-2 MPLS LSP Trigger Information Window The fields that can be configured are described below: Parameter SN Action IP Address Mask Description Enter the sequence number of the LSP trigger filter rule here. When creating a new rule, if not specified, the SN begins from 10 and is incremented by 10. The range is from 1 to 10000. Select the action that will be taken here. Options to choose from are: Permit - Specifies to permit LDP in establishing the LSP to follow the IP prefix FEC. Deny - Specifies no permit LDP in establishing the LSP to follow the IP prefix FEC. Enter the IPv4 address FEC on which the rule will apply. Enter the subnet mask FEC on which the rule will apply. Selecting the Any option specifies that the rule will apply on any IP prefix FEC. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Clear All button to clear all the information related to the SN entered. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MPLS Forwarding Settings This window is used to display and configure the MPLS forwarding settings. The Static FTN Settings section is used to add or delete a static FEC-To-NHLFE Map (FTN) entry. FEC stands form Forwarding Equivalence Class and NHLFE stands for Next Hop Label Forwarding Entry. At the ingress Label Edge Router (LER), the incoming IP packets that are classified to the Forwarding Equivalence Class (FEC) will be pushed with the MPLS label and forwarded to the next hop according to the FEC-to-NHLFE (FTN). The Static ILM Settings section is used to add a static Incoming Label Map (ILM) entry. At LSR, the incoming MPLS packets that are matched to the incoming label will be processed according configured ILM action. The label operation 594