D-Link DXS-3610 User Manual - Page 253

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured in ECMP Load Balancing Settings are described below: Parameter Destination IP Source IP CRC 32 Lower CRC 32 Upper TCP/UDP Port Description Select this option to use the destination IP address as the ECMP hash key. Select this option to use the least significant bits of the source IP address as the ECMP hashing algorithm. Select this option to use the lower bits of CRC-32 as the ECMP hashing algorithm. Select this option to use the upper bits of CRC-32 as the ECMP hashing algorithm. Select this option to use TCP/UDP port number as ECMP hash key. Click the Apply button to accept the changes made. The fields that can be configured in ECMP Advance Control Mode are described below: Parameter ECMP Advance Control Mode Setting Description Select the ECMP advance control mode settings here. This specifies the number of ECMP or multipath routes and the number of next-hops of each ECMP or multipath route that will be changed according to the specified value. Options to choose from are 64, 128, 256, 512, and 1024. Click the Apply button to accept the changes made. IPv6 General Prefix This window is used to display and configure the VLAN interface IPv6 general prefix settings. To view the following window, click L3 Features > IPv6 General Prefix, as shown below: Figure 6-30 IPv6 General Prefix Window The fields that can be configured are described below: Parameter Interface VLAN Prefix Name IPv6 Address Description Enter the VLAN interface ID used here. The range is from 1 to 4094. Enter the IPv6 general prefix entry name here. This name can be up to 12 characters long. Enter the IPv6 address and prefix length here. The prefix length of the IPv6 address is also the local subnet on the VLAN interface. Click the Apply button to accept the changes made. 242