D-Link DXS-3610 User Manual - Page 325

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide PIM RP Candidate This window is used to display and configure the PIM RP candidate settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM RP Candidate, as shown below: Figure 6-113 PIM RP Candidate Window The fields that can be configured in RP Candidate Global Settings are described below: Parameter VRF Name Priority Interval Wildcard Prefix Count Description Click the Please Select button to display and select a VRF instance from the list. Enter the candidate RP's priority value here. The range is from 0 to 255. By default, this value is 192. Select the Default option to use the default value. Enter the candidate RP's advertisement interval value here. The range is from 1 to 16383 seconds. By default, this value is 60 seconds. Select the Default option to use the default value. Enter the multicast group address wildcard (224.0.0.0/4) prefix count value in the C-RP message here. This value can either be 1 or 0. By default, this value is 0. Select the Default option to use the default value. Click the Apply button to accept the changes made. The fields that can be configured in RP Candidate Settings are described below: Parameter VRF Name Interface Name Group Access List Name Description Click the Please Select button to display and select a VRF instance from the list. Enter the name of the interface here. Enter the standard access list that will be used here. Alternatively, click the Show List button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Select the All Groups option to map the candidate RP to all multicast groups. Click the Add button to add a new entry based on the information entered. 314