D-Link DXS-3610 User Manual - Page 643

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide sFlow sFlow Agent Information This window is used to view the sFlow agent information. To view the following window, click Monitoring > sFlow > sFlow Agent Information, as shown below: Figure 13-18 sFlow Agent Information Window sFlow Receiver Settings This window is used to display and configure receivers for the sFlow agents. Receivers cannot be added to or removed from the sFlow agent. To view the following window, click Monitoring > sFlow > sFlow Receiver Settings, as shown below: Figure 13-19 sFlow Receiver Settings Window The fields that can be configured are described below: Parameter Receiver Index Owner Name Expire Time Max Datagram Size Collector Address UDP Port Description Enter the index number of the receiver here. The range is from 1 to 4. Enter the owner name of the receiver here. This name can be up to 32 characters long. Enter the expiration time for the entry here. The parameters of the entry will reset when the timer expired. The range is from 1 to 2000000 seconds. Selecting Infinite specifies that the entry will not expire. Enter the maximum number of data bytes of a single sFlow datagram here. The range is from 700 to 1400 bytes. By default, this value is 1400 bytes. Enter the remote sFlow collector's IPv4 or IPv6 address here. Enter the remote sFlow collector's UDP port number here. The range is from 1 to 65535. By default, this value is 6343. 632