D-Link DXS-3610 User Manual - Page 482

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Extended Expert ACL After selecting an Extended Expert ACL and clicking the Add Rule button, the following page will appear. Figure 8-19 Extended Expert ACL (Add Rule) Window The fields that can be configured are described below: Parameter Sequence No. Action Protocol Type Source IP Address Description Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If this value is not specified, the system will automatically generate an ACL rule number for this entry. Select the action that this rule will take here. Options to choose from are Permit, Deny, and Deny CPU. Select the protocol type option here. Options to choose from are TCP, UDP, ICMP, EIGRP (88), ESP (50), GRE (47), IGMP (2), OSPF (89), PIM (103), VRRP (112), IP-in-IP (94), PCP (108), Protocol ID, and None.  Value - The protocol ID can also manually be entered here. The range is from 0 to 255.  Mask - After selecting the Protocol ID option, manually enter the protocol mask value here. The range is from 0x0 to 0xFF.  Fragments - Select this option to include packet fragment filtering. Select and enter the source information here. Options to choose from are:  Any - Any source traffic will be evaluated according to the conditions of this rule.  Host - Enter the source host IP address here. 471