D-Link DXS-3610 User Manual - Page 264

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter VRF Name ACL Name Interface Name Description Enter the name of the VRF instance here. This can be up to 12 characters long. Enter the access list name that will be used here. This name can be up to 32 characters long. Enter the interface name that will be used here. This name can be up to 12 characters long. Click the Apply button to accept the changes made. Click the Show Detail button to display more information about the RIP distribute list. After clicking the Show Detail button, the following page will appear. Figure 6-42 RIP Interface Settings (Edit) Window Click the Back button to return to the previous window. RIP Interface Settings This window is used to display and configure the RIP interface settings. To view the following window, click L3 Features > RIP > RIP Interface Settings, as shown below: Figure 6-43 RIP Interface Settings Window The fields that can be configured are described below: Parameter VRF Name Network Description Enter the name of the VRF instance here. This can be up to 12 characters long. Enter the IPv4 network address used by RIP here. Interfaces that have a subnet belonging to the network specified here will be activated for RIP. 253