D-Link DXS-3610 User Manual - Page 180

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide After click the Edit button, the following window will appear. Figure 5-63 ERPS Profile (Edit) Window The fields that can be configured are described below: Parameter TCN Propagation Revertive Guard Timer Hold-Off Timer WTR Timer Description Select the checkbox and then select the TCN propagation state. Options to choose from are Enable and Disabled. This function is used to enable the propagation of the topology change notifications from the sub-ERP instance to the major instance. Select the checkbox and then select the revertive state. Options to choose from are Enable and Disabled. This function is used to revert back to the working transport entity, for example, when the RPL is blocked. Select the checkbox and enter the guard timer value here. The range is from 10 to 2000 milliseconds. By default, this value is 500 milliseconds. Select the checkbox and enter hold-off timer value here. The range is from 0 to 10 seconds. By default, this value is 0 seconds. Select the checkbox and enter the Wait To Restore (WTR) timer value here. The range is from 1 to 12 minutes. By default, this value is 5 minutes. Click the Back button to discard the changes made and return to the previous window. Click the Apply button to accept the changes made. Loopback Detection The Loopback Detection (LBD) function is used to detect the loop created by a specific port. This feature is used to temporarily shut down a port on the Switch when a CTP (Configuration Testing Protocol) packet has been looped back to the Switch. When the Switch detects CTP packets received from a port or a VLAN, this signifies a loop on the network. The Switch will automatically block the port or the VLAN and send an alert to the administrator. The Loopback Detection port will restart (change to normal state) when the Loopback Detection Recover Time times out. 169