D-Link DXS-3610 User Manual - Page 45

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide 4. Management Command Logging User Accounts Settings Password Encryption Password Recovery Login Method SNMP RMON Telnet/Web Session Timeout DHCP DHCP Auto Configuration DHCP Auto Image Settings DNS IP Source Interface File System Stacking Virtual Stacking (SIM) D-Link Discovery Protocol SMTP Settings Reboot Schedule Settings NLB FDB Settings Command Logging This window is used to display and configure the command logging function. The command logging function is used to log the commands that have successfully been configured on the Switch via the command line interface. The command, along with information about the user that entered the command, is included in the system log. Commands that do not cause a change in the Switch configuration or operation (such as 'show' commands) are not logged. To view the following window, click Management > Command Logging, as shown below: Figure 4-1 Command Logging Window The fields that can be configured are described below: Parameter Command Logging State Description Select to enable or disable the command logging function here. Click the Apply button to accept the changes made. 34