D-Link DXS-3610 User Manual - Page 329

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide After clicking the Show List button, the following page will appear. Figure 6-117 PIM Register Settings (Show List) Window The fields that can be configured are described below: Parameter ACL Type ACL List Description Select the ACL type that will be used to display the type of existing access lists in the table here. Options to choose from are Standard IP ACL, Extended IP ACL, Standard IPv6 ACL, Extended IPv6 ACL, Extended MAC ACL, and Extended Expert ACL. Select the radio button of the access list in the table that will be used here. Click the Find button to display a list of access lists based on the selection made. Click the Show All button to display all configured access lists. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Click the Apply button to use the selected access list. PIM SPT Threshold Settings This window is used to display and configure the PIM SPT threshold settings. Use this feature on the last hop of the router. In the PIM-SM mode, initially the multicast traffic from the source will be flowing along the RPT share tree to the receiver. After the first packet arrives at the last hop router, for each group of traffic, it can operate in one of the following two modes. With the mode Infinity, the traffic keeps following the share tree. With the mode 0, the source tree will be established and the traffic Switchover to the source tree. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM SPT Threshold Settings, as shown below: Figure 6-118 PIM SPT Threshold Settings Window 318