D-Link DXS-3610 User Manual - Page 562

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Description Select the No Limit option to disable the rate limit. Click the Apply button to accept the changes made. The fields that can be configured in Sub-Interface Information are described below: Parameter Sub-Interface Description Select the sub-interface option here. Options to choose from are Manage, Protocol, and Route. Click the Find button to locate a specific entry based on the information entered. CPU Protect Type This window is used to display and configure the CPU protection type settings. To view the following window, click Security > Safeguard Engine > CPU Protect Type, as shown below: Figure 9-82 CPU Protect Type Window The fields that can be configured in CPU Protect Type are described below: Parameter Protocol Name Rate Limit Description Select the protocol name option here. Enter the rate limit value used here. The range is from 0 to 1024 packets per second. Select the No Limit option to disable the rate limit. Click the Apply button to accept the changes made. The fields that can be configured in Protect Type Information are described below: Parameter Type Description Select the protocol type here. After selecting the protocol type, the Rate Limit assigned to the protocol type will be displayed. Select the Unit option to specify the unit ID of the Switch in the physical stack. Click the Find button to locate a specific entry based on the information entered. 551