D-Link DXS-3610 User Manual - Page 595

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Ethernet link without PHY support. OAM vendor specific messages are used in the detection. The detection process is started after OAM discovery was started but does not complete the negotiation in the configured discovery time. To view the following window, click OAM > Ethernet OAM > Ethernet OAM DULD Settings, as shown below: Figure 10-24 Ethernet OAM DULD Settings Window The fields that can be configured in Ethernet OAM DULD Settings are described below: Parameter Unit From Port - To Port Admin State Action Discovery Time Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Select to enable or disable the admin state here. This feature is used to enable Ethernet OAM unidirectional link detection on the specified port(s). Select the action that will be taken here. Options to choose from are Normal and Shutdown. Enter the discovery time value here. The range is from 5 to 65535 seconds. By default, this value is 5 seconds. If the OAM discovery does not successfully negotiate before discovery time expired, OAM unidirectional link detection will start. Click the Apply button to accept the changes made. The fields that can be configured in Ethernet OAM DULD Table are described below: Parameter Unit From Port - To Port Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to display all the entries. 584