D-Link DXS-3610 User Manual - Page 277

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide OSPFv2 Interface Settings This window is used to display and configure the OSPFv2 interface settings. To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Interface Settings, as shown below: Figure 6-57 OSPFv2 Interface Settings Window The fields that can be configured in OSPF Interface Settings are described below: Parameter VRF Name Area ID Network IP Address Network Mask Description Enter the name of the VRF instance here. This can be up to 12 characters long. Click the Select VRF button to display and select a VRF instance from the list. Select and enter the OSPFv2 area ID here. This can be specified in the IP address format or in the decimal value format. The decimal range is from 0 to 4294967295. Enter the network IPv4 address here. Enter the network IPv4 subnet mask here. Click the Apply button to accept the changes made. The fields that can be configured in OSPF Interface Table are described below: Parameter VRF Name Interface Name Description Enter the name of the VRF instance here. This can be up to 12 characters long. Click the Select VRF button to display and select a VRF instance from the list. Enter the name of the interface to be displayed here. Click the Find button to locate a specific entry based on the information entered. Click the Show Detail button to view detailed information about the entry. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 266