D-Link DXS-3610 User Manual - Page 441
Set-DSCP-Transmit, Transmit, Set-DSCP-1P, Violate Action, Color Aware, Enabled, Disabled, Apply
View all D-Link DXS-3610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 441 highlights
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Violate Action Color Aware Description Set-DSCP-Transmit - Specifies to enter the IP DSCP value in the space provided. This value sets the IP differentiated services code point (DSCP) value and transmits the packet with the new IP DSCP value. Set-1P-Transmit - Specifies to enter the 1P transmit value in the space provided. This value sets the 802.1p value and transmits the packet with the new value. Transmit - Specifies that packets will be transmitted unaltered. Set-DSCP-1P - Specifies to enter the IP DSCP and 1P transmit values in the spaces provided. By default, the Drop option is used. Packets are dropped. Select the violate action here. The violate action specifies the action to take on packets that violate the normal and maximum burst sizes for singe rate policing. It specifies the action to take for those packets that did not conform to both CIR and PIR. Options to choose from are: None - Specifies that no action will be taken. Drop - Specifies that the packet will be dropped. Set-DSCP-Transmit - Specifies to enter the IP DSCP value in the space provided. This value sets the IP differentiated services code point (DSCP) value and transmits the packet with the new IP DSCP value. Set-1P-Transmit - Specifies to enter the 1P transmit value in the space provided. This value sets the 802.1p value and transmits the packet with the new value. Transmit - Specifies that packets will be transmitted unaltered. Set-DSCP-1P - Specifies to enter the IP DSCP and 1P transmit values in the spaces provided. By default, for a single rate policer, a single-rate two-color policer is created. By default, for a two-rate policer, the Drop option is used. Packets are dropped. Select the color aware option here. Options to choose from are: Enabled - Specifies that the policer work in the color-aware mode. Disabled - Specifies that the policer work in the colorblind mode. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. To view the following window, select the Two Rate Settings tab, as shown below: Figure 7-15 Aggregate Policer (Two Rate Settings) Window 430