D-Link DXS-3610 User Manual - Page 645

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide sFlow Poller Settings This window is used to display and configure the sFlow poller settings. To view the following window, click Monitoring > sFlow > sFlow Poller Settings, as shown below: Figure 13-21 sFlow Poller Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Instance Receiver Interval Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the instance index number if multiple samplers are associated with one interface. The range is from 1 to 65535. Enter the receiver index value for this poller here. The range is from 1 to 4. Enter the maximum number of seconds between successive polling samples. The range is from 0 to 120 seconds. Entering 0 will disable this feature. By default, this value is 0. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 634